Alto-Shaam AR-7E/VH - Manual (Page 11)

START-UP
1.
Before operating the unit, become familiar with
the operation of the controls. Read this manual
carefully and retain it for future reference.
2.
Ensure the filters inside the hood are correctly in
place and the door is closed.
3.
Turn on the hood by turning the power switch ቢ
to the “I” position
• Note that the fan indicator light ባ will
illuminate while running.
4.
Wait 5 seconds and press the reset button ቤ to
allow the rotisserie to be turned on.
5.
Continue with the operation instructions for the
rotisserie on page 10.
VENTLESS HOOD
CONTROL IDENTIFICATION
1
2
3
1 POWER SWITCH
2 FAN INDICATOR LIGHT
3 RESET BUTTON
GREASE FILTER
CHARCOAL FILTER
AT T E N T I O N
HOOD AND ROTISSERIE WILL NOT
OPERATE UNLESS FILTERS ARE IN PLACE.
C A U T I O N
THE EDGES INSIDE THE HOOD HOUSING
CAN BE SHARP. USE CAUTION WHEN
REMOVING OR REPLACING FILTERS.
D A N G E R
DISCONNECT UNIT FROM
POWER SOURCE BEFORE
CLEANING OR SERVICING.
A R - 7 E V H E l e c t r i c R o t i s s e r i e w i t h Ve n t l e s s H o o d O p e r a t i o n & C a r e M a n u a l • 9
O P E R AT I N G I N S T R U C T I O N S