Grace Digital GDI-IRD4000 Allegro - Manual (Page 19)

19
If you choose more screens are displayed and you can choose what you want to listen.
What is displayed will depend on the station you have chosen - the following steps are only a guide.
2. When you choose , the display shows the names of the programs. Turn the knob to
choose the program you want, then press the ‘Select’ button.
3. When you have chosen the program you want to listen to, either it will just start playing, or the display
may show a list of days for you to choose from - use the knob to set the day the program was
broadcast, then press the ‘Select’ button.
4. After you have chosen the day, you may be able to choose the Start Time. Set the Start Time using
the knob and press the ‘Select’ button.
5. Program which enable you to choose the time also enable you to fast-forward and rewind to the part
you want to into to while the radio is playing. The elapsed time is displayed. Using the Skip forward
(P3) or Skip backward (P1). Skip forward or backward in 30 second intervals.
Setting the clock
1. Press the ‘Select’ button. (Note: if you make a mistake at any point, press the BACK button to go
back to the previous screen.)
2. Turn the knob until the display shows
Media Player
Alarm Clock
< Settings >
3. Press the ‘Select’ button.
4. Turn the knob until the display shows
Register
< Clock Setup >
Sleep Timer