ELRO CR1 WLAN Repeater USERS MANUAL - Manual (Page 30)

802.11n WiFi Repeater User’s Manual
30
3. If the wireless network isn’t encrypted, click on "Connect
Anyway" to connect.
4. If the wireless network is encrypted, enter the network key
that belongs to your authentication type and key (the
default settings Security Mode = WPA2 Mixed,
Passphrase = last 8 digits of WLAN MAC Address
which could be found from the device sticker).
5. Click on "Connect" or "Apply".
6. Now you are ready to use the Wireless Network to Internet
or intranet.