ELRO C704IP.2 WiFi network pt camera - Manual (Page 19)

19
Minimal system requirements:
CPU: 2.0 GHZ or higher
Memory: 256 MB or higher
Video card: 64 MB or higher
Supported OS: Windows 98/ME/2000/XP/Vista/7/8
Supported browsers: IE6.0-10.0, Firefox, Safari, Google Chrome
Supported mobile OS: iOS 4.3 and higher / Android 2.1 and higher
Certification: CE, FCC, RoHS, R&TTE
Warranty: Limited 3-year warranty
3.2. Main component parts
1
1. C704IP.2 camera
2. Camera base
3. Detachable antenna
4. 4 assembly screws and plugs
5. DC supply
6. Ethernet cable
7. Software CD-ROM
8. User's manual
3.3. Connections
2
1. Antenna port
2. Ethernet port
3. I/O port
4. DC connection
5. Audio connection
6. Reset opening
4. Camera installation
4.1. Connecting the camera
• Screw the antenna into the antenna port 3 .
• Connect the adapter cable to the DC connection of the camera 4 . Then insert the
adapter plug into the power outlet.
• Connect the included ethernet cable to the network port of the camera 5 . Connect
the other end of the ethernet cable to your router. The green LED on the ethernet port
will light up when the camera is connected to the network. The LED on the front of the
camera will also begin flashing.
You can now operate your IP Camera using your smartphone or PC. Go to section 4.2 for
use with smartphone and go to section 4.3 for installation on your PC.
4.2. Settings for smartphone use
! Attention! To use the “ELRO INSTALL” App, you need a smartphone with internet
access.
! Attention! To scan a QR code, you need an APP that can scan barcodes.
To set up your camera using Android, go to section 4.2.1. To set up your camera using iOS,
go to section 4.2.2.