ELRO FA420DVR 4-ch digital recorder + 500 gb hard disc USERS MANUAL - Manual (Page 50)

Page 50
Figure 4.25 Mobile Monitoring Settings
【
Enable
】
Highlight
■
to enable the mobile monitoring function. Settings can only be activated after
you tick Enable;
【
Port
】
Mobile monitoring port number. To access DVR using mobile device, map the port number
on the router
【
UPnP
】
UPnP protocol automatically forwards port mapping on the router. When using the
function, make sure that the UPnP on the router is enabled.
Figure 4.26 UPnP Settings
【
Enable
】
Highlight
■
to enable the UPnP function. Settings can only be activated after Enable is
ticked;
【
HTTP
】 ：
Router will automatically assign a port number to the device. Need to enter the port
number to start an IE browser
【
TCP
】 ：
Router will automatically assign a port number to the device. Monitoring using client
software will go through this port