ELRO FA420DVR 4-ch digital recorder + 500 gb hard disc USERS MANUAL - Manual (Page 44)

Page 44
4.4.3 Network Settings
Figure 4.16 Network Settings
【
Net Card
】
May choose from wired or wireless network cards
；
【
Obtain IP Address Automatically
】
Obtain IP address automatically (not recommended)
；
Note: Installation of DHCP server is required in advance
【
IP Address
】
Set DVR’s IP address. Default IP address
：
192.168.1.10
；
【
Subnet Mask
】
Set subnet mask. Default subnet mask settings
：
255.255.255.0
；
【
Gateway
】
Set Default Gateway for the device. Default setting
：
192.168.1.1
；
【
DNS Settings
】
DNS server, analyzes and identifies the IP address provided by your local network
provider. Restart the system after set the address
；
【
TCP Port
】
Default is 34567
；
【
HTTP Port
】
Default is 80
；
【
Network High Speed Download
】
Network high speed download
；
【
Network Transmission Strategies
】
Three strategies
：
Self-adaptive, Picture Quality Preferred,
Fluency Preferred. Depending on the settings, network transmission will automatically adjust the bit rate.
Self-adaptive strategy balances the quality and fluency, providing fluent transmission without
compromising too much on the quality. Fluency Preferred and Adaptive strategies will only take effect
when sub-stream is enabled. In the case that sub-stream is not enabled, Quality Preferred sets the
priority according to the network quality.