Axis Communications 241SA - Manual (Page 56)

56 AXIS 241QA/AXIS 241SA - System options
Resetting to the factory default settings
To reset the AXIS 241QA/AXIS 241SA to the original default settings, go to the System
Options > Maintenance web page (described in Maintenance, on page 54) or use the
control button on the AXIS 241QA/AXIS 241SA, as described below:
Using the Control Button
Follow the instructions below to reset the AXIS 241QA/AXIS 241SA to the factory default
settings using the Control Button.
1. Switch off the AXIS
241QA/AXIS 241SA by
disconnecting power.
2. Press and hold the Control
Button while reconnecting the
power.
3. Keep the Control button
pressed until the Status
Indicator displays amber (this
may take up to 15 seconds).
4. Release the Control Button.
5. When the Status Indicator changes to Green (may take up to 1 minute), the
process is complete and the AXIS 241QA/AXIS 241SA has been reset.
6. Re-install the AXIS 241QA/AXIS 241SA, as described in the Installation Guide.
Control Button Status Indicator