Acer 500 - Manual (Page 107)

BIOS Utility
Chapter 5 Software 87
Startup Configuration
The Startup Configuration screen contains parameters that
are related to computer startup.
The following table describes the parameters in this screen.
Settings in boldface are the default and suggested
parameter settings.
Parameter Description
Boot Display Sets the display on boot-up.
When set to Auto, the computer automatically
determines the display device. If an external
display device (e.g., monitor) is connected, it
becomes the boot display; otherwise, the
computer LCD is the boot display. When set to
Both, the computer outputs to both the
computer LCD and an external display device if
one is connected.
Options: Auto or Both
Memory Test Enables or disabled memory test on boot-up.
Options: Disabled or Enabled
500-e.book : 500-5e.fm Page 87 Monday, August 17, 1998 9:36 PM