eLine Technology SIP-NVR - Manual (Page 8)

-14- -15-
Back to Login interface
----END
3.6 Add Network cameras
This NVR allow to connect maximum12 pcs network cameras. Recording baud rate
totally is 24Mbps and live video total baud rate is 12bps.
 NVR maximum support to connect 12 pcs D1 resolution with average bard rate is
2Mbps network camera, If total baud rate more than 24Mbps it may cause NVR to
lose video and not run stable.
 When Add HD IP camera, it can be added by reduction the number of channel or
the camera baud rate.
 Detail Specifications please refer to 2 Specifications
Add Network camera
Option One：Private Network Setup
Method 1: NVR will discover the network camera automatically.
Camcorder network is a network exists only network cameras and NVR, there is no other
network equipment, and this network is dedicated to the NVR and network cameras, audio
and video transmission. Dedicated camera network must be connected with the NVR LAN2,
and ensure that the LAN2 camera network functions are enabled (factory default enabled
detailed configuration, see "Network Video Recorder User Manual quick configuration
through LAN1 access NVR.
LAN2 Camera dedicated network function is enabled，NVR functions as：
 Enable DHCP service automatically assigns IP addresses to network cameras (network
cameras enable DHCP function).
 Automatic network search network camera.
 Search to automatically add network cameras, and enable 24 * 7 hours of video
 Private Network Setup is default open.
The camera dedicated network topology shown in Figure 3-6.
Figure 3-6 Camera dedicated network
Method 2: Add the camera manually.
Discover the network camera we can discover by broad cast, IP segment search, and pointed
IP search. Network camera have to be pointed IP first and stay with a same sub network
segment.
3.7 Login
Login to the equipment using the following steps：
Step 1
In the login screen shown in Figure 3-1, enter a user name, password.
eLineTechnology.com