DE DIETRICH CBB - Manual (Page 11)

11
15/09/2008 - 300008541-001-E CBB
4. Commissioning and ignition
4.4 Ignition - CBB 30
1. Set the On/Off switch to 1.
2. Pull the smoke extraction handle
3. Open the loading door.
4. Put some inflammable kindling with some paper on the bottom of
the combustion chamber. Leave a space of 2 to 4 cm between
the logs for the smoke to escape. Put in logs and light.
5. Close the loading door.
6. When the wood is well lit (about 20-30 minutes later), continue to
fill the combustion chamber.
Close the loading door.
7. Push the smoke extraction handle back in
4.5 Adding more logs - CBB 30
Only add more logs if the previous load has been consumed to
at least 1/4 of the original volume.
1. Open the loading door.
2. Add logs to the combustion chamber.
3. Close the loading door.
Maximum duration of the combustion of a load (in hours)
Model CBB 30
Hardwood/softwood 2.5
Conifers 2