Abocom LA100 - Manual (Page 12)

3. In Networks dialog box, check the radio button
before "Install Microsoft Windows Network"
and "No Additional Network". Press OK to
go back the Network Settings screen.
4. Click on "Drivers..." button to select network
driver.
5. In "Network Drivers" dialog box, press "Add
Adapter..." button to enter "Add Network
Adapter" dialog box. Select "Unlisted or
Updated Network Adapter" and press OK.
6. Windows will prompt an "Install Driver"
dialog box. In this time, put the software
diskette into floppy drive and press OK.
7. Select the "Real mode NDIS2 for...." string
and press OK.
8. Follow Windows instructions to complete the
installation and exit Windows.
9. Run INSTALL.EXE from driver diskette's root
directory.
10. Select "Windows for Workgroup" in
"Network Operating System" screen and enter
"Driver Install" screen.
11. If current settings are acceptable, select "Start
Installation" and go to step 13. Otherwise,
select "Modify Parameters" to make settings
changed.
12. Move cursor to focus on the setting you want to
make change and press Enter to select a fit
value. When the configuration is accepted,
press Enter on the OK field to exit the screen.
- 11 -