Abocom LA100 - Manual (Page 10)

6. For the first time installation, please click
Network icon in Control Panel to add
Protocols, Client and Service if you needed.
7. Reboot the machine and the card will be fully
functional.
Installation for Windows Workgroup 3.11
NDIS3 Driver for Workgroup
1. Click on "Network Setup" icon in "Network"
program group.
2. In "Network Settings" dialog box, click mouse
on "Networks..." button to select the network
operating system.
3. In "Networks" dialog box, check the radio
button before "Install Microsoft Windows
Network" and "No Additional Network".
Press OK to go back to the Network Settings
screen.
4. Click on "Drivers..." button to select network
driver.
5. In "Network Drivers" dialog box, press "Add
Adapter..."button to enter "Add Network
Adapter" dialog box. Select "Unlisted or
Updated Network Adapter" and press OK.
6. Windows will prompt an "Install Driver"
dialog box. In this time, put the software
diskette into floppy drive and press OK.
7. Select the "Enhanced mode NDIS3 for...."
string and press OK.
8. Follow Windows instructions to complete the
- 9 -