Alcatel-Lucent 1850 TSS-5 - Manual (Page 2)

www.alcatel-lucent.com
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo
are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility
for inaccuracies contained herein. Copyright © 2008 Alcatel-Lucent. All rights reserved.
CAR4688080810 (09)
Technical specifications
Alcatel-Lucent 1850 TSS-5 system
• 5 Gb/s chassis
• Two multiservice interface slots
• Two half-slots for controller and
interface modules
• SFP transceivers for all SONET/
SDH and GE interfaces
• CWDM optics for all SONET/SDH
and GE interfaces
Alcatel-Lucent 1850 TSS-5
service interface modules
Ethernet module
• 20 x 100BASE-TX (10/100) plus
4 x GE (100/1000 optical or
1000 electrical)
• 6 x FE: half-slot module for EoS,
4 x 100BASE-T plus 2 x 100BASE-FX
SONET/SDH transport with Ethernet
over SONET/SDH (EoS) modules
• 8-port T1/E1
• 28-port T1 or 21-port E1
Both 8-port and 28/21-port models
equipped with:
• 3 x DS3/E3: DS3 Transmultiplexer
(TMUX); 1 channelized, 2 unchan-
nelized; with FEAC loopback and
alarms
• 1 x GE: 1000 optical or electrical
• 2 x OC-3/12 or STM-1/4
CES modules
• 8-port T1/E1
• 16-port T1/E1
• 1-port OC-3/STM-1, channelized
to T1/E1
Each CES module equipped with:
• 2 x GE: 100/1000, optical
or electrical
• Loop and differential timing
• IEEE 1588v2 for clock distribution
Ethernet functionality
• IEEE 802.3 Ethernet interfaces
10/100/1000 Mb/s
• Media Access Control (MAC)
bridging, IEEE 802.1D, including
Rapid Spanning Tree Protocol
(RSTP) and Multiple Spanning
Tree Protocol (MSTP)
• 16,000 MAC table
• Virtual local area network (VLAN)
bridging, IEEE 802.1Q
• Provider bridging IEEE 802.1ad,
Ethernet line (E-line), Ethernet
LAN (E-LAN)
• Link aggregation
• Layer 2 control protocol tunneling
aggregation
• Ethernet OAM IEEE 802.3ah link
loopback
• Connectivity Fault Management
(CFM) IEEE 802.1ag: loopbacks,
connectivity check, link trace
• Ethernet Ring Protection G.8032
• Jumbo frames: 9 kb
• Full duplex, flow control, MDIX
• Port mirror: in and/or out
• Layer 2 and Layer 3 Access
Control Lists (ACLs) for filtering
and rate limiting
• Multiple classification options:
port, VID, P-bits, MAC DA/SA,
differentiated services code
points (DSCP)
• Eight Quality of Service (QoS)
classes
• Ingress policing
• Class-based queuing
• Strict priority, weighted round
robin (WRR) scheduling and
tail-drop
• Egress shaping
• Multilink Point-to-Point Protocol
(MLPPP)-Ethernet interworking
with static routing
• Port-based statistics
PWE3 functionality
• T1/E1 pseudowires: RFC 4553,
structure-agnostic TDM over
packet (SAToP)
• Bidirectional forwarding detec-
tion (BFD) for 1 + 1 tunnel
protection
• Related RFCs: 4553, 4446, 4197,
3985, 3916
SONET/SDH functionality
• Unidirectional path-switched ring
(UPSR): VT1.5/STS1/STS-3c, Sub-
network Connection Protection
(SNCP, VC-12/3/4)
• EoS: frame mapped generic
framing procedure (GFP-F),
virtual concatenation (VCAT)
including low-order VCAT, link
capacity adjustment scheme
(LCAS), client signal fail (CSF)
• Line timing, SSM with auto-re-
configuration and DS1/E1 building
integrated timing supply (BITS)
output; free-run
• Equipment protection
• Standard SONET/SDH perfor-
mance monitoring, loopbacks
• DS1 in-band loopback
• DS3 FEAC loopback and alarms
Management
• Alcatel-Lucent 1350 Optical
Management System (OMS)
• Alcatel-Lucent 1340 Integrated
Network Controller (INC)
• Transaction Language 1 (TL1)
• Command-line interface (CLI)
• Simple Network Management
Protocol (SNMP) v2, v3
• SONET/SDH data communication
channel (DCC)
• IP tunneling for remote software
download
Physical specifications
Dimensions and weight
• Height: 125 mm (4.9 in.)
• Width: 441 mm (17.4 in.)
• Depth: 280.6 mm (11.0 in.)
• Weight, fully loaded: 6.8 kg (15.0 lb)
• Standard ANSI or ETSI frames
Power
• -48-V DC or +24-V DC
• Redundant power-supply option
• Current drain: 2.5 A maximum,
at -48-V DC
• Maximum heat dissipation: 100 W
Environmental
• Hardened for outside-plant
operation
• Operating temperature:
-40ºC to +65ºC
• Humidity: 5% to 95%,
non-condensing
Regulatory compliance
• NEBS Level 3 GR-1089-CORE
Issue 4, GR-63-CORE Issue 3
• CE Mark: EN 300 386
• IEC 60825-1 and IEC 60825-2,
21 CFR 1040
• UL/CSA 60950-1, CSA C22.2
No.60950-1, EN 60950-1
• EN 55022 Class A: radiated and
conducted emissions
• EN 61000-4-2, -3, -4, -5, and -6
• ETSI 300-019 Storage, Class 1.2;
Transportation, Class 2.3; Opera-
tional, Class 3.2
• FCC Part 15 and Industry Canada
ICES-003 Class A
• FCC Part 68
• ANSI T1.315 / ETS EN 300-132-2
¬ Efficiently grooms and delivers
traffic at the mobile telephone
switching office (MTSO) through
SONET/SDH interfaces
¬ Is environmentally hardened for
cell-site deployment
¬ Delivers cost-effective, Layer 1 and
Layer 2 oriented network infra-
structure at cell site and MTSO
• Offers additional applications:
hybrid TDM and Ethernet services
for business and residential services:
¬ Delivers unified platform for both
services
¬ Offers fast time-to-market
• Mixes data, voice and multimedia
services on one platform
• Seamlessly operates in circuit and
packet networks