Allied Telesis AT-AR441S - Manual (Page 2)

Allied Telesis www.alliedtelesis.com
AT-AR441S | Secure ADSL Router
of PICs, including BRI/PRI ISDN, high speed
E1/T1, Synchronous, and FXS VoIP.
Performance
The AT-AR441S modular router provides a
significant improvement in the performance of
Allied Telesis' modular router family.The 300MHz
CPU within the AT-AR441S ensures that large
packets are forwarded at wire-speed and that
small packets are forwarded with minimal delay.
Comprehensive Management
and Configuration
The AT-AR441S comes with a comprehensive
suite of management features and is also
compatible with SNMP based management
packages. An extensive command set is available
via the Command Line Interface (CLI), and a
browser-based Graphical User Interface (GUI) is
also provided to simplify configuration and
management of the AT-AR441S.The GUI provides
access to default set-ups in key management areas
and provides access to regional settings. Allied
Telesis' SNMP support extends to SNMPv3, which
provides the option of secure management.
Feature Summary
ADSL
Annex B
G992.1 G.DMT
ANSI T1.413
Downstream data rate: Up to 8 Mbps
1
Upstream data rate: Up to 640Kbps 1
Connector: RJ11
30 PVCs
Dying gasp
RFC 2684 MPoA Encapsulation over ATM (IP,
bridging & encapsulated routing)
RFC 2364 PPPoA
RFC 2516 PPPoE
RFC 2225 IPoA Classical IP & ARP over ATM
Routing
PPP and IP Routing
RIP V1 & V2
DHCP
OSPF
DVMRP (including draft_
ietf_idmr_dvmrp_v3_10)
BGP-4
2
IPX
NAT
WAN Protocols
X.25
Frame Relay
VPN
L2TP
NAT-T
Windows
® XP VPN client interoperability
Security
Hardware acceleration
IPSec
IKE
ISAKMP
PKI
SSH
SSL
SMTP & HTTP Proxy
Authentication: RADIUS,TACACS, MD5, PAP,
CHAP
Encryption: DES, 3DES , AES
IP Filtering
Firewall: Stateful Inspection
QOS
IP
• RSVP
• IP Packet Prioritisation
• Prioritisation based on TOS & Diffserve
• Low latency queuing (LLQ)
• Weighted fair queuing
ATM
• Per VC queuing and traffic shaping
• Unspecified bit rate (UBR)
• Constant bit rate (CBR)
• Nonreal-time variable bit rate (VBRnrt)
Management
CLI
Browser Based GUI
SNMPV3
IPv6 2
RIPng
IPv6 RFC 2460
Neighbour discovery RFC 2461
Stateless address autoconfiguration RFC 2462
ICMP v6 RFC 2463
Transmission of IPv6 packets RFC 2464
Connection of IPv6 domains via IPv4 clouds
RFC 3056.
PIMv6
Reliability
MTBF: 120 000 hrs
Redundancy
External modem backup
VRRP
WAN Load Balancing
ISDN Backup
1 Maximum specified by ADSL chip-set vendor,
achieved speeds are dependent on DSLAM and
line characteristics, including length
2 Software features requiring the purchase of a feature
licence
3 Available in AlliedWare release 2.9.1-08 or later,
requires the purchase of a feature licence
Hardware Features
1 x ADSL Port
5 x 10/100 Mbps Switch
1 x Async Console port
1 x Port Interface Card (PIC)
DMZ port: Obtained by configuring one of the
switch ports
Processor
300MHz
Internal security encryption engine
Memory
64MB Ram
16MB Flash
Power Characteristics
Input Voltage: 100-240 VAC, 50-60 Hz
Max Power Consumption: 40W
Internal Battery Backup (1 year)
Physical Dimensions
Dimensions: 335mm (W) x 44mm (H)
x 180mm (D)
Weight: 1.96kg
Environmental
Operating Temp: 0 o C to 50 o C
Storage Temp: -25 o C to 70 o C
Operating relative humidity: 5 to 80% non-
condensing
Acoustic Level: ANSI S12.10 – Desktop 47 dBA
Approvals & Certifications
U-R2
UL
TUV
UL60950
EN60950
EN55022 class A
EN55024
FCC class A
VCCI class A
AS/NZS CISPR22 class A
Optional Extras
Rack mount accessory kit: 990-000023-00
Wall mount accessory kit: 990-000025-00
Port Interface Cards:
• AT-AR020 Single configurable E1/T1
interface that supports
channelized/ unchannelized
Primary Rate ISDN/Frame Relay
• AT-AR021S Single Basic Rate ISDN
(V3)
4 (S/T) interface
• AT-AR023 Single Synchronous port up to
2Mbps to an external CSU/DSU
(AT-V.35-DTE-00 or AT-X.21-DTE-
00 cable required)
• AT-AR024 Four Asynchronous RS232
interfaces to 115Kbps
• AT-AR027 Two VoIP FXS ports
4 AR021S (V3) requires AlliedWare ® Operating System version
2.9.1-13 or later