Asus Xeon Tower/5U Rackmount Server AP1710-S5 - Manual (Page 47)

2-29 ASUS AP1710-S5 user guide
2.9.4 Power supply modules
The AP1710-S5 has two power supply modules. These hot swap power
modules can be removed or installed while the server is powered ON. One
power module is enough to power the server. When two power supply
modules are installed, the task of providing power to the server is shared.
To remove the redundant power supply module:
1. Remove the power module
screw.
2. Press down the rubber lever
3. Pull the power module handle
from the chassis.
Screw
Lever
Redundant Power Housing
500W Redundant
Power Module
2
3
1
Refer to the Appendix for the redundant power module specification.