Asus Motherboard A7Pro - Manual (Page 70)

ASUS A7PRO User’s Manual 70
4. BIOS SETUP
4. BIOS SETUP
PCI Configuration
USB Function [Enabled]
This motherboard supports Universal Serial Bus (USB) devices. Set to [En-
abled] if you want to use USB devices. Configuration options: [Disabled]
[Enabled]
Primary VGA BIOS [PCI Card]
If your computer has both PCI and AGP VGA cards, this field allows ¥ou to
select which of the cards will act as your primary graphics card. [AGP Card]
uses the AGP card as your primary card. The default, [PCI Card], allows
your PCI graphics card to take precedence when detected. Configuration
options: [PCI Card] [AGP Card]
Onboard ATA device First [Yes]
When set to [Yes], this field allows the devices on the ATA/100 channel to
be bootable. Configuration options: [No] [Yes]
IRQ XX Reserved for Legacy Device [No/ICU]
These fields indicate whether or not the displayed IRQ for each field is
being used by an onboard legacy (non-PnP) legacy device. The default value
indicates either that the displayed IRQ is not used or that legacy Configura-
tion Utility (ICU) is being used to determine if an ISA device is using that
IRQ. Configuration options: [No/ICU] [Yes]
PCI/PNP IRQ Resource Exclusion