AVE ATM Interface TCPIP232 - Manual (Page 5)

TCPIP232 LED Indicators
GREEN POWER TCPIP-232 Power Status
RED RECEIVE TCPIP-232 Receive Data from ATM
GREEN LINK ATM Status, On = Ready/OFF = Not ready
YELLOW SPEED OFF = 10Mbps, On = 100Mbps Ethernet
Cables and Pin assignments:
TCPIP232-PC/DVR Cable
This is RS232 Cable. User uses to programming IP Address on TCPIP232 and
then remove and pluge to DVR to insert ASCII text on Video.
TCPIP232 Port PC/DVR Port
DB9 Female DB9 Female
Pin-5 (GND)--------------------------------------------------Pin-5 (GND)
Pin-2(RXD)---------------------------------------------------Pin-3 (TXD)
Pin-3(TXD)---------------------------------------------------Pin-2 (RXD)
TCPIP232-VSSI-Pro Cable
This is also RS232 Cable. User users use to interface with VSSI-Pro. This cable
also provided reached alarm cable to interface with alrm systems. and also included Serial
output to connect with DVR to get text insertion. This kind of text insertion will help user to
used it to serach video by seraching from Text . This feature is for AVE DVR only.
TCPIP232 VSSI-Pro DVR
Pin-5(GND)-------------------------Pin-5(GND)----------------------------Pin-5(GND)
Pin-2(RXD)-------------------------Pin-3(TXD)
Pin-3(TXD)-------------------------Pin-2(RXD)
Pin-8(CTS)-----------------------------Pin-2(RXD)
Pin-1(Alarm)
PAGE 5
4. Select TCPIP Format I to enter and Change the IP Address the same as ATM’s IP
Address. Example, if the ATM’s IP address is 192.168.0.141 So the address on TCPIP-
232 Adapter this menu as:
*IP ADDRESS 1 192
IP ADDRESS 2 168
IP ADDRESS 3 0
IP ADDRESS 4 141
EXIT
1. Exit off to return to the main menu then press RESET button to operation mode.
2. Test you transaction on ATM to verify VSSI-Pro and TCPIP-232 Adapter’s Operation.