At3iont-i series sata power connector, At3iont-i series usb2.0 connectors – Asus AT3IONT-I User Manual
Page 21

ASUS AT3IONT-I Series
1-12
3.
USB connectors (10-1 pin USB78, USB910)
These connectors are for USB 2.0 ports. Connect the USB module cables to these
connectors, then install the module to a slot opening at the back of the system chassis.
These USB connectors comply with USB 2.0 specification that supports up to 480
Mbps connection speed.
AT3IONT-I DELUX
E
AT3IONT-I SERIES USB2.0 connectors
PIN 1
USB+5V
USB_P8-
USB_P8+
GND
NC
USB+5V
USB_P7-
USB_P7+
GND
USB78
PIN 1
USB+5V
USB_P10-
USB_P10+
GND
NC
USB+5V
USB_P9-
USB_P9+
GND
USB910
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB module cable is purchased separately.
2.
SATA power connector (4-pin SATA_PWR1) (for AT3IONT-I DELUXE only)
This connector is for SATA power cable. The power cable plug is designed to fit this
connector in only one orientation. Find the proper orientation and push down firmly until
the connector completely fit.
AT3IONT-I DELUX
E
AT3IONT-I SERIES SATA power connector