Asus AT3IONT-I - Manual (Page 19)

ASUS AT3IONT-I Series 1-10
10. RCA Out port (left-channel) (for AT3IONT-I DELUXE only). This port connects a
receiver or a TV via an RCA cable.
11. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are for
USB 2.0 devices.
12. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are for
USB 2.0 devices.
13. Optical S/PDIF Out port. This port connects to an external audio output device via an
optical S/PDIF cable.
14. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-Ray, and other protected
content.
15. USB 2.0 ports 5 and 6. These two 4-pin Universal Serial Bus (USB) ports are
available for connecting USB 2.0 devices.
16. DC power port (for AT3IONT-I DELUXE only). This port connects to an DC power
adapter.
Refer to the audio configuration table below for the function of the audio ports in the 2, 4, 6,
or 8-channel configuration.
Audio 2, 4, 6, or 8-channel configuration
Port Headset 2-channel 4-channel 6-channel 8-channel
Light Blue (Rear panel) Line In Rear Speaker Out Rear Speaker Out Rear Speaker Out
Lime (Rear panel) Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink (Rear panel) Mic In Mic In Bass/Center Bass/Center
Lime (Front panel) – – – Side Speaker Out
To configure an 8-channel audio output:
Use the chassis with HD audio module in the front panel to support 8-channel audio output.