AOC LM929 - Manual (Page 10)

LM929
9
INSTALLATION INSTRUCTIONS (Cont)
Connecting The Cables
Figure 2 Connecting Cables
1. 15-pin D-SUB Cable 2. 24-Pin DVI Cable
3. Audio Cable 4. AC Power Cord
Turn off your computer before performing the procedure below.
1. Connect one end of the 15-pin D-Sub cable to the back of the monitor and
connect the other end to the computer’s D-Sub port.
2. (Optional – Requires a video card with DVI port) Connect one end of the
24-pin DVI cable to the back of the monitor and connect the other end to the
computer’s DVI port. be tightened.
3. (Optional) - Connect the PC stereo cable between the monitor's audio
input and the PC's green audio output port.
4. Connect the female end of the AC power cord to the AC-in port on the
back of the monitor. Connect the other end to a nearby AC-outlet.
5. Turn on your monitor and computer. If you monitor diplays an image,
installation is complete. If not, refer to the FAQ (frequently asked questions)
section for troubleshooting.