American DJ DJ Scan 250EX - Manual (Page 5)

American DJ ® - www.americandj.com - DJ Scan 250 EX™ Instruction Manual Page 10 American DJ ® - www.americandj.com - DJ Scan 250 EX™ Instruction Manual Page 9
vate Pan inversion, select No and press Enter.
I TLT -
Tilt Inversion
1. Tap the MENU button until “ I TLT” is displayed, press ENTER.
Either NO or 1 will be displayed.
2. To activate the Tilt inversion tap the UP or DOWN buttons
until
I is displayed, press ENTER to confim and exit. To deacti-
vate Tilt inversion, select No and press Enter.
LED -
With this function you can have the LED display
turn off after 10 seconds.
1. Tap the MENU button until “
LED” is displayed, press ENTER.
2. The display will show either “ ON” or “OFF”. Press the UP or
DOWN buttons to select “ ON” to keep the LED display on at
all times, or “ OFF” to switch to have the LED display switch off
after 10 seconds.
3. Press ENTER to confirm and exit.
I DSP -
This function will reverse the display 180º.
1. Tap the MENU button until “ I DSP” is displayed, press ENTER.
2. Press ENTER to “flip” the display. Press ENTER to “flip” it
again. To save the adjustment press any other button.
TEST
- This function will run a self test program. The test
program will test pan/tilt mirror movement and colors.
1. Tap the MENU button until “
TEST” is displayed, press ENTER.
2. The fixture will now run a self test.
FHRS
- With this function you can display the running time
of the unit.
DJ Scan 250 EX™ System Menu
1. Tap the MENU button until “ FHRS” is displayed, press
ENTER.
2. The display shows the running time of the unit. Press MENU
to exit.
VER
- With this function you can display the version soft-
ware of the unit.
1. Tap the MENU button until “
VER” is displayed, press ENTER.
2. The display will now display the version of software. Press
MENU to exit.
RSET
- Use this function to reset the unit.
1. Tap the MENU button until “ RSET” is displayed, press ENTER.
2. The fixture will now reset.
DJ Scan 250 EX™ System Menu