Contemporary Research 232-STSi V 4.5 - Manual (Page 6)

Contemporary Research 6 232-STSi Stereo PAL TV Tuner V4
Front Panel Programming
To Enter a Front Panel Programming Mode:
1. Press and hold the Mute A/V button such that the red LED light above is lit (indicating Mute On).
2. Press Volume Up.
3. Release all buttons, the 232-STSi will now be in the front panel programming mode.
4. The front panel display is dedicated to programming information display while in this mode.
5. Changes are saved in non-volatile memory as they are entered.
6. The Volume up/down buttons scroll through programming modes 0 through 9 and 10+.
7. The Channel up/down buttons scroll through possible parameters for each mode.
To Exit the Front Panel Mode
Push and release the Mute All A/V button.
Modes 10 and above
When you select programming mode 10 and above, the Mode digit and decimal point will flash. For example, if
Mode 14 is selected, the display will show a flashing
4. - followed by the current parameter setting.
The Modes 10 – 14 are identical to RS-232 Commands Q0 – Q4.
TV Standards and Channel Plans
To meet the needs of different countries and varying cable/broadcast frequencies, 232-STSi channels are
defined in two ways:
• TV Standards sets the basic TV standard used by the country, including PAL B, D, G, H, K, and I and
SECAM L, B, D, G, H, K
• Channel Plans are settings that offer different arrangements of mapping frequencies to 232-STSi channel
numbers. To view the Channel Plans available for various PAL and SECAM formats, see the Channel Plans
section in this manual