Com-Power AM-741 - Manual (Page 2)

All values are typical values unless specified.
Specifications are subject to change without notice.
Specifications
Typical AM-741 Characteristics using ANSI C63.5 ESCM Calibration Method
Mechanical Outline
Frequency Range: 9 kHz - 30 MHz
Flatness: ±1 dB
Output Impedance: 50 Ohm
Connector Type: BNC (f)
Collapsible Element Length: 41 inches (fully extended)
Base Plate: 24 x 24 inches (60 x 60 cm)
Battery Type: 6 V NimH
Charger Input: 6 VDC 500, mA
Tripod mount: 1/4 x 20 inch threads hole
Size: see below
Weight: 19 lbs. (8.6 kg)
Field strength (dBuV/m) = Output measured(dBuV) + Antenna factor(dB)
Com-Power Corporation 114 , Olinda Drive, Brea, California 92823 (714) 528 - 8800 www.com-power.com
24.0"
24.0"
24.0"
41"
15.5"
7"
Bottom VIEW
SIDE
VIEW
2.0"
-4.00
-3.00
-2.00
-1.00
0.00
1.00
2.00
3.00
4.00
0.001 0.010 0.100 1.000 10.000 100.000
dB
MHz