CHIEF FCA611 - Manual (Page 7)

Installation Instructions FCA611
7
11. Use two #10-24 lock nuts (J) to secure small shelf (A) to
center support bracket. (See Figure 4)
12. Use two #10-24 lock nuts (J) to secure small shelf (A) to
right and left support brackets (B and C) and front support
(K). (See Figure 4)
Figure 4
13. Reinstall side covers into side slots on cart/stand column.
(See Figure 5)
14. Reinstall column inner cover to cart/stand column. (See
Figure 5)
15. Reinstall back cover to cart/stand column. (See Figure 5)
16. Install desired components to shelf.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located on the FCA611 does not exceed 25
lbs (11.34 kg).
Figure 5
Adjustments
Height Adjustment
1. Remove column inner cover from cart/stand. (See Figure 6)
2. Remove side covers from cart/stand by sliding them up the
channel. (See Figure 6)
3. Loosen set screws on each side of shelf. (See Figure 6)
4. Loosen all button head cap screws holding shelf to column.
(See Figure 6)
5. Adjust shelf height to desired level. (See Figure 6)
6. Tighten all button head cap screws holding shelf to column.
(See Figure 6)
7. Reinstall side covers into side slots on cart/stand column.
(See Figure 6)
8. Reinstall column inner cover to cart/stand column. (See
Figure 6)
Figure 6
(J) x 2 11
12 (J) x 2
(K)
(A)
(C)
14
14
13
15
15
16
8
1
7
2
5
3
4 6