CHIEF KTP Series - Manual (Page 3)

Installation Instructions Model: KTP-Series
3
ASSEMBLY AND INSTALLATION
Mount Assembly
KTP-230 Assembly
To assemble the KTP-230:
1. Assemble pole (60) to base (40) using one 3/8-16 x 1"
FHCS (90). (see Figure 2)
Figure 2: Assemble Pole to Base
2. Place front pole clamp, with Centris Head, (210)
against pole in approximate mounting location.
3. Place three BHCS (230) into rear pole clamp (220)
and place against pole aligning with front pole clamp
(210). (see Figure 3)
Figure 3: Mount Centris Head with Pole Clamp
NOTE: Equally tighten screws (230) against front pole
mount (210) and rear (220) pole clamps. (see
Figure 4)
(60)
(140)
(40)
(90)
(210)
(60)
(220)
(230)
Figure 1: Parts
(10 Includes 210, 220, 230)
(20)
(30)
(50) (60) (70)
(80)
(90)
(100)
(110)
(120)
(130)
(140)
(160)
(170)
(180)
(190)
(200)
240
250
260
270
(40)