American Dryer Corp. EURO-24 - Manual (Page 42)

38
1) Display will read “READY” (meaning no cycle in progress).
2) Press the letter on the keyboard (touch pad) corresponding to the cycle desired (i.e., key “E”).
Dryer will start to rotate.
3) Light emitting diode (L.E.D.) display will now toggle “Drying” “manual” “Cycle” “30 Min” “Remain”
meaning the dryer is in the drying cycle and count down in minutes.
NOTE: Pressing keyboard (touch pad) key “A,” “B,” “C,” “D,” and “F” will also start the dryer. The
six (6) preprogrammed drying cycles (“A”-“F”) have been stored in the microprocessor
controller’s (computer’s) memory. Refer to the Computer Programming Manual supplied with
dryer for more specific operating information.
NOTE: The dryer can be stopped at any time by opening main door or by pressing the “STOP” key.
To restart the dryer, press the “START” key or preprogrammed cycle key (i.e., “E”).
NOTE: Selection (setting) changes can be made at anytime during the drying cycle by pressing the
“CLEAR/STOP” key twice. The L.E.D. display will return to “READY” at which time a new
cycle selection can be made.
b. Dual Timer Dryers
1) To start the dryer:
a) Microprocessor controller (computer) dryers
(1) The L.E.D. display will read “FILL.”
(2) Press the “E” on the keyboard (touch pad).
(3) The L.E.D. display will quickly show “Ld30,” “LC04,” “F180.” The dryer will start, and the
L.E.D. display will show “dr30.”
b) Dual timer dryers
(1) Turn drying timer knob for a time of 20 minutes.
(2) Select “High Temp.”
(3) Push “Push To Start” switch.
(4) To stop dryer, open the main door.
2) Spin and stop times are adjustable at the reversing timer.