CEMB USA TR-V - Manual (Page 4)

Composition:
• Transmitter suitable to be fitted on DIN guide rails
TR-V model interfaceable with velocimeter
TR-A model interfaceable with preamplified accelerometer
Usable transducers:
• velocimeters sensibility 21.2 mV/mm/sec
T1-40 – T1-40V – T1-40BF – T1-38 – T1-38V – T1-38BF
• accelerometer sensibility 100 mV/g
TA-18 – TA-18/S
Power supplies:
• 24 Vdc nominal (24 – 35 Vdc), 4 ÷ 20 mA current loop
(2 or 3 wire)
External connections:
• terminal board for connecting transducer to acquisition system
(max cable section 2,5 mm
2 )
• BNC connector for connecting to analyser
Environmental range of use:
• -10° C ÷ + 70° C
Technical data
All the data and features mentioned in this catalogue are purely for information and do not
constitute any commitment on the part of our company, which reserves the right to make any and
all alterations it may consider suitable without notice.
CEMB S.p.A.
Via Risorgimento, 9
23826 Mandello del Lario (LC) Italy
www.cemb.com
Vibration analysis division:
phone +39 0341 706111
fax
+39 0341 706299
e-mail: [email protected]
B A L A N C I N G M A C H I N E S
A
T 500 1020 06/08