Hunter 28547 Outdoor Marine II Low Profile Globe Light Kit - Manual (Page 8)

8
43552-01 • 04/15/14 • Hunter Fan Company
4 • Installing the Light Kit on a Fan with a Removable Switch Housing Cap
1. Uninstall the two attachment screws from the switch housing cap.
2. Align the screw holes in the included two additional gaskets with the
screw holes on the top of the light kit.
3. Remove the wire connectors from the two wires in the switch housing
labeled “Connect Light Here” or “For Light Use.” One wire is white and the
other wire is blue.
4. To connect the wires, hold the bare metal leads together and place a wire
connector over them, then twist the wire connector clockwise until tight.
Connect the blue from the switch housing to the black wire from the
light kit. Connect the white wire from the switch housing to the white
wire from the light kit. Secure all wire connections using wire connectors.
5. Align the threaded screw holes in the switch housing cover with the
threaded holes in the switch housing. Attach light fixture to the switch
housing using the included attachment screws.
CAUTION: Be sure no bare metal
wires or wire strands are visible
after making the connections.
WARNING: Improper installation
could cause the light fixture to fall.
Switch
Housing
Cap
Attachment
Screw
Removable Switch
Housing Cap
Step 1
Gasket
Step 2
Attachment
Screws
Step 5