Hunter 99096 CFL Bowl Light Kit - Manual (Page 5)

MA001-01 • 07/22/13
1.888.830.1326
5
Installing the Pull chain pendant -
Attach the pull chain pendants to the
end of the short chains coming from the
switch housing and the light kit. Turn on
power. Your installation is complete!
Installing the bulb - Install a bulb into each
socket. When necessary, replace bulbs with
bulbs of same type and wattage.
Socket
Installing the globe-Press the globe and
globe keeper flush against the metal
plate. Thread the light pull chain through
the hole in the center of the finial cap
and thread the fan pull chain through the
hole in the side of the cap. Finally, thread
only the light pull chain through the hole
in the finial and screw the finial onto the
threaded rod.
TYPE-A ASSEMBLY INSTRUCTIONS (CONTINUED)
7
6 5
Globe
Globe
Keeper
Finial Cap
Finial