Hunter 25268 Original Schoolhouse Globe Light Kit - Manual (Page 2)

2
43546-01 • 07/01/10 • Hunter Fan Company
Table Of Contents
Installing the Light Kit on Fans With
Removable Switch Housing . . . . . . . . 4
Installing the Light Kit on Fans With
Non-Removable Switch Housing . . . 6
Installing the Light Kit on the Hunter
Original . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing Bulbs, Chain, and Globe . . . . . . 9
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 10
© 2010 Hunter Fan Company
Your new Hunter
®
light kit is an addition to your home or office that
will provide comfort and performance for many years . This installation
and operation manual gives you complete instructions for installing
and operating your light kit .
We are proud of our work . We appreciate the opportunity to supply
you with the best products available anywhere in the world .
Before installing your light kit, for your records and warranty assistance,
record information from the carton and Hunter nameplate label .
Cautions and Warnings
• READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING
INSTALLATION. SAVE THESE INSTRUCTIONS.
• Use only Hunter replacement parts .
• To reduce the risk of personal injury, install this light fixture only on
Hunter® fan types A through Z . Note: The fan type can be found on
the ceiling fan package or on the nameplate label located on top of
the motor housing of the ceiling fan .
• To avoid possible electrical shock, before installing light fixtures,
disconnect the power by turning off the circuit breakers both to
the outlet box and to its associated wall switch location . If you
cannot lock the circuit breakers in the off position, securely fasten a
prominent warning device, such as a tag, to the service panel .
• Connect house wiring to the fan before attaching the light fixture to
the fan .
• All wiring must be in accordance with national and local electrical
codes and ANSI/NFPA 70 . If you are unfamiliar with wiring, use a
qualified electrician .
Welcome