Hunter 23252 44 Baseball Fan - Manual (Page 6)

6
Hunter Fan Company 41081-01 • 09/05
3 • Assembling and Hanging the Fan
3-1. Remove the blade mounting screws and rubber shipping
bumpers from the motor.
3-2. Assemble the blade ramp, blade, and blade bracket as shown.
3-3. Align the holes in the ramp, blade, and blade bracket with the
holes in the top of the fan.
3-4. Use the longer blade screws to attach the taller end of the blade
assembly to the fan, and the shorter blade screws to attach the
shorter end of the blade assembly to the fan. Tighten all screws
securely.
3-5. Leaving the backing on one side of the dot, place the adhesive
dots onto the back of the decorative decal (the side without
printing).
Note: If you have a textured ceiling, you may need to smooth a
surface for the dots to adhere, or purchase a thicker adhesive.
3-6. Place the decorative decal over the canopy and let it rest on the
fan.
Blade Bracket
Blade
Step 3-5
Adhesive
Dot
Ramp
Decal
Step 3-2
Longer
Screw
Shorter
Screw
Longer
Screw
Shorter
Screw