Hunter 59148 52 Raefield - Manual (Page 6)

www.HunterFan.com
1.888.830.1326
M3548-01 • 12/19/13 • © Hunter Fan Company
Blades
Your blades are shielded with Dust Armor® which
is a nanotechnology coating that repels dust. For
cleaning the fan, use soft brushes or cloths to prevent
scratching. Cleaning agents may damage the finishes.
6
Using the included Allen wrench, secure
each blade to a blade iron as shown using
the blade nuts, found in the hardware
bag, and the blade assembly screws, found
in the hardware bag.
Lightly attach the blade irons to the
motor with the blade iron armature
screws, found in the hardware bag,
then securely tighten after all screws are
attached.