Hunter 55049 70 Fernwood - Manual (Page 19)

www.HunterFan.com
1.888.830.1326
M0068-01 • 04/22/13 • © Hunter Fan Company
19
Cleaning the fan - use soft
brushes or cloths to prevent
scratching. Cleaning products
may damage the finishes.
Changing the direction of air
flow - move the reverse switch to
the opposite position.
Reverse
Switch
Changing the bulbs - unscrew
the finial and remove it from
the threaded rod. Remove the
finial cap and unscrew the globe
keeper while supporting the
globe with your other hand.
Carefully remove the globe.
Unscrew bulbs and replace with
bulbs of same type and wattage.
Reinstall the globe assembly.
Finial
Finial
Cap
Globe
Keeper
Metal
Plate
Globe
For questions regarding removing a light kit, call
customer service 1-888-830-1326.
Safe-Exit
• Press the Fan Off button for at least three
seconds to initiate the Safe-Exit Mode.
• The lights will flash for visual confirmation.
• The lights will stay on 50% brightness for 15
seconds and then begin to dim. After a total
of 30 seconds, the lights will be completely
off.
The Safe-Exit Program gives you about thirty
seconds of light when you turn the lights off
to exit the room before the lights go out. To
use Safe-Exit:
Operation, Maintenance, & Cleaning (continued)