Hunter 55049 70 Fernwood - Manual (Page 16)

www.HunterFan.com
1.888.830.1326
Remote Control
ON
Turn P
ow
er
To access the battery compartment, remove
the small Phillips head screw that secures
the battery door to the transmitter assembly.
The battery should be installed with the
positive (+) side up. Replace with a CR2032
battery when necessary.
Battery
Door
Phillips
Head
Screw
Note: The remote must be paired before
the fan will operate.
Within 3 minutes of restoring power to
the fan, press both the Fan Off button and
the High button for at least 4 seconds. Your
fan will turn on low to indicate successful
syncing. If it does not, turn off power to
your fan, wait 1 minute then try again. If
using the transmitter with multiple fans,
repeat this process for each fan.
Fan Off High
16
M0068-01 • 04/22/13 • © Hunter Fan Company
16