Hunter 28795 54 Barrington - Manual (Page 14)

14
42490-01 • 02/02/12 • Hunter Fan Company
8 • Completing Your Installation With a Bowl Light Fixture (Continued)
Installing the Glass Bowl
8-4. First install B10 candelabra bulbs (40 Watt Maximum) into the
sockets.
8-5. Thread the pull chains through the holes in the metal disc. Then,
thread the pull chains through the hole in the center of the glass
bowl.
8-6. Thread the pull chains through the grommet holes on the sides of the cover plate.
8-7. Place the cover plate up against the glass bowl. Align the holes in the cover plate and glass bowl.
8-8. Screw the finial onto the threaded rod end until tight.
8-9. Attach the extra pull chains with pendants (included) to the light and fan pull chains using the
breakaway connector. (You may find the breakaway connector on the end of the extra chain.)
Finial
Cover Plate
Glass Bowl
Metal Disc
Metal Rod
Light Bulbs
(B10
Candelabra
Base 40 Watt
Maximum)
Breakaway
Connector