J&M HHC-42 - Manual (Page 8)

Pg. 8
DW-108
DW-121
SAFETY SIGNS
ATTENTION: BECOME ALERT! YOUR SAFETY IS INVOLVED!
Replace Immediately If Damaged or Missing!
IMPORTANT: Install new
safety signs if the old signs
are destroyed, lost, painted
over or cannot be read.
When parts are replaced that
have safety signs, make sure
you install a new sign with
each new part. New signs
are
available from the
manufacturer or your
authorized dealer.
DECAL PARTS LIST
Item # Part # Description
1 DW-121 Warning: Tire, Wheel, Lug Nut
2 DW-108 Warning: Fasten Header Securely
SET-UP INSTRUCTIONS
IMPORTANT: Set-up work to be performed by qualified servicemen only.
1. Mounting the Rear Axles
Secure the Dura-Flex Axles to the axle mounts located on the
underside of the Header Transport Main Frame using four 5/8” x 1-
3/4” Grade 5 bolts with eight 5/8” flat washers and four 5/8”
locknuts.
NOTE: The axle should be positioned so the spindle
is located toward the rear of the axle centerline.
2. Mounting the Tires
Secure one tire and wheel assembly to each of the rear hub
assemblies using the wheel nuts provided. Use a star pattern to
tighten the spindle nuts according to SAE standards.
Align the holes on each side of the Dura-Flex Axle with the
tabs welded to the underside of the Main Frame.