J&M HHC-42 - Manual (Page 12)

Pg. 12
SET-UP INSTRUCTIONS (continued)
8. Placing the Amber, Red and Orange Reflective Decals
Place the reflective decals as shown below.
9. Installing the Safety Chain Around the Ball Hitch Axle
Weldment
Bolt the ring end of the safety chain to the underside of the
gooseneck using one 3/4” x 5” Grade 8 Bolt and 3/4” Lock
Nut. Loop the chain around the Strap Weldment located on
the back side of the front axle.
Amber Decal Amber Decal Amber Decal
Red Decal
Orange Decal
Amber Decal
Amber Decal Amber Decal