J&M 500ST User Manual
Page 12

12
1.0 Operations
6.
Using the remote, open the hydraulically driven doors on the speed tender.
WARNING: Empty-out the rear compartment first to help prevent the chance of flipping the
Speed Tender.
7.
Use the Handheld Control or Wireless Remote to start the conveyor.
8.
Fill the planter/drill to desired level then repeat.
NOTE: Adjusting engine throttle will regulate conveyor speed.
9.
Close door on Speed Tender before the last planter seed box is full so you can completely empty-out
collapsible hopper and conveyor.
CAUTION: If you are parked on an incline the boom arm may swing freely. (It is advised that
you do not use the Speed Tender on uneven ground).
Figure 1.6
Figure 1.4
See Section 4.1 for Remote Options
Figure 1.5
Wireless
Remote
Handheld
Control
Hopper Up
- 525-14W (31 pages)
- 750-16 (33 pages)
- 750-18 (34 pages)
- 1000-20 (31 pages)
- 1050-20 (37 pages)
- 1130-20 (36 pages)
- 1325-20 (36 pages)
- GC-24T Manual (39 pages)
- GC-31T Manual (38 pages)
- GRAIN CARTS Leaner Setup (18 pages)
- 250-7S (12 pages)
- 385SD (13 pages)
- 440SD (13 pages)
- 680SD (13 pages)
- 750SD (13 pages)
- GW15t-1 (20 pages)
- 275ST (62 pages)
- 375ST (62 pages)
- 375ST Remote (24 pages)
- 500ST Remote (23 pages)
- PRO 450 (31 pages)
- TF2 (37 pages)
- HT-974 (16 pages)
- TB-3500-6000A (20 pages)
- TB-3500-6000H (21 pages)
- TB-8000H-42 (20 pages)
- 4WS15 (27 pages)
- 750-14 (29 pages)
- 818 (35 pages)
- 875-16 (29 pages)
- 1000-20S (34 pages)
- 1050-18S (28 pages)
- 1050-18D (22 pages)
- 1050-20S (33 pages)
- 1050-20D (33 pages)
- 1050-22S (23 pages)
- 1050-22D (14 pages)
- 1051-22S (33 pages)
- 1051-22D (33 pages)
- 1075-18R (23 pages)
- 1075-22R (23 pages)
- 1325-20S (33 pages)
- 1325-20D (33 pages)
- 1325-22S (23 pages)