J&M 500ST Remote - Manual (Page 13)

MEGA REMOTE
12
by tapping on the line
and using the scratch
pad to enter a new value
4. Tap the Save button to
send the setting to
memory
The lines to the right of the
parameter indicate the
present value of the output (if
active).
Calibration parameters menu
Tap the Factory Setting
button to return all outputs to
standard values. Tap Save to
send these settings to
memory. Tap Done and Exit
to quit configuration and
return to the main menu.
The following can be adjusted
as needed:
1. Open Time – The
amount of time that the
output stays on