J&M 500ST Remote - Manual (Page 12)

MEGA REMOTE
11
CALIBRATION
To change the configuration of
the outputs, tap the
Calibration
icon.
Calibration page
The password to gain access
to the calibration screens is
1262.
In these screens,
configuration for proportional
outputs is available.
Output selection menu
To adjust a proportional
output’s configuration, use
the following procedure:
1. Select the output to
change from the first
drop-down menu
2. Select the parameter of
the output to change
from the second drop-
down menu
3. Enter the new value on
the line above the
Factory Setting
button