J&M 375ST Remote - Manual (Page 16)

MEGA REMOTE
15
ROUTINE
MAINTENANCE
Clean transmitter regularly
with a damp cloth and mild
detergent.
Inspect electrical wiring for
wear points or other damage.
Repair as required.
Inspect all connections for
looseness
or corrosion.
Tighten and/or "seal" as
necessary.
MAINTENANCE
PRECAUTIONS
When performing any
inspection or maintenance
work on the remote system,
always exercise care to
prevent injury to yourself and
others or damage to the
equipment. The following are
general precautions, which
should be closely followed in
carrying out any maintenance
work.
Do not have hydraulic power
available to the valves when
performing electrical tests.
Never operate or test any
function if any person is in an
area where they could be hurt
by being hit or squeezed by
the hydraulic equipment.
Turn power off before
connecting or disconnecting
valve coils or other electrical
loads.
TROUBLESHOOTING
This next section provides
basic
operator level
troubleshooting for the MEGA
REMOTE system. If, after
following these instructions,
the system still does not
function, contact your KAR-