J&M 375ST Remote - Manual (Page 13)

MEGA REMOTE
12
Output selection menu
To adjust a proportional
output’s configuration, use
the following procedure:
1. Select the output to
change from the first
drop-down menu
2. Select the parameter of
the output to change
from the second drop-
down menu
3. Enter the new value on
the line above the
Factory Setting
button
by tapping on the line
and using the scratch
pad to enter a new value
4. Tap the Save button to
send the setting to
memory
The lines to the right of the
parameter indicate the
present value of the output (if
active).