Audiovox LCM50 - Manual (Page 5)

128-6549
5 of 12
1) Remove the headrest
from the vehicle for easi-
est installation.
2) Lay headrest on a flat sur-
face.
3) Center trim collar on head-
rest as shown.
NOTE: Depending on the
angle of the headrest , the Trim
Ring and housing may be
mounted upside down.
4) Using a Permanent Marker,
mark headrest material
along the interior of the
Trim Ring.
5) Remove the Trim Ring
and mark an “X” from cor-
ner to corner as shown.
Headrest Mounting:
Monitor
Mounting
Tray
Trim
Ring Headrest
5