beautypg.com

Prepare for your next garden, Cleaning instructions for your aerogarden, When your garden has completed it’s growing cycle – AeroGarden 100733-DSS User Manual

Page 15

background image

Prepare For Your Next Garden

14

Cleaning instructions for your aerogarden

Use only water and mild soap when cleaning your AeroGarden (except when Sanitizing - Step 7). Do not use

abrasive cleaners or run through the dishwasher.

When your garden has completed it’s growing cycle…

Unplug AeroGarden.

Carefully remove Bowl and

Grow Surface from Base and

bring to a sink. Set Base and

Lamp Hood aside.
NEVER SUBMERSE BASE AND

CONTROL PANEL IN WATER.

Remove Grow Surface from

Bowl and place on a counter

near a sink.

Empty contents of Bowl in sink.

Remove Seed Pods and plants

from Grow Surface.
• Pull Seed Pods out of Grow

Surface openings.

• Throw away Seed Pods and

plant debris (plant growth and

roots). If you compost, plant

debris can be composted.

Rinse and clean Grow Surface,

Pump Stand and Pump Filter.*
• Use a soft scrub brush to clean

tangled roots from underside of

Grow Surface and Pump Stand.

• Remove Pump Filter from

Pump Stand. Gently scrub

roots from Pump Filter.

• Place Pump Filter back into

Pump Stand.

After cleaning, there may still be a few

roots in your Grow Surface, Pump Stand

or Pump Filter. This will not affect the

operation of your AeroGarden.

1

2

3

4

5

6

* iMPortant note: We recommend replacing the Pump Filter after growing

two gardens. order Pump Filters from www.aerogardensupport.com or from

your retailer.

Pump

Stand

Pump

Filter

Plant

Growth

Seed

Pod

Roots

Grow

Surface

Sanitize AeroGarden.
• Fill Bowl ¾ full with water.
• Add ¼ cup (59ml) of chlorine

bleach.

• Replace Grow Surface on Bowl,

place Bowl on Base and plug in

AeroGarden for 1-2 minutes.

(Select Salad Greens on Control

Panel to be sure water is flowing.)

• Unplug AeroGarden and empty

bleach water from Bowl.

Rinse AeroGarden.
• Refill Bowl with tap water and

replace on Base.

• Plug in and run AeroGarden

for 1-2 minutes. (Select Salad

Greens again.)

Unplug AeroGarden, empty Bowl

and repeat this step (step 8) one

more time.

Towel dry the Bowl and Grow

Surface before putting them back

together and setting them back on

the Base.

If your Grow Bulbs have been in use

more than 6 months, they should be

replaced at this time (see page 12).

Your AeroGarden is now ready for

replanting.

9

7

8

10

This manual is related to the following products: