Installation, 1 package contents, Location – Carolina Electronic Balances User Manual
Page 5
2. INSTALLATION
2.1 Package Contents
•
Scale
•
Pan
•
Draft Shield
•
Power Adapter
•
Instruction Manual
2.2. Location
Use the scale on a firm, steady surface. Avoid locations with excessive air currents,
vibrations, heat sources, or rapid temperature changes.
2.3. Transportation Lock, Calibration Lock & Pan Installation
Before using the scale the Transportation Lock must be released. At the bottom of the
scale slide the locking pin to the position. See Figures 2-1.
If the scale is to be calibrated by the user ensure that the Calibration Lock is set to the
position. See Figure 2-2.
Install the metal pan over the plastic sub-platform.
Figure 2-1. Release Transportation Lock
Figure 2-2. Release Calibration Lock