Carolina NeuLog Flow User Manual
Page 4
NEULOG FLOW SENSOR GUIDE
The flow sensor houses an internal water wheel, as liquid flows through the probe the
wheel rotates at the same velocity. The water wheel does not connect directly to the
walls of the sensor, but instead floats on a bearing to lower the friction of the system
which allows for the water wheel to take the velocity of the water passing through it
more accurately. When the water wheel rotates a small magnetic field is generated
due to an internal mechanism. The magnetic field is easily determined, measured,
and converted into velocity.
Maintenance and storage:
Never submerge the NeuLog
sensor’s plastic body in any liquid.
Do not allow liquid into the flow sensor’s body.
After use, gently wipe away any foreign material from the flow sensor.
Store in a box at room temperature out of direct sunlight.
Warranty:
We promise to deliver our sensor free of defects in materials and workmanship for a
period of 3 years from the date of purchase. Our warranty does not cover damage of
the product caused by improper use, abuse, or incorrect storage. Sensors with a shelf
life such as ion selective proves have a warranty of 1 year. Should you need to act
upon the warranty please contact your distributor. Your sensor will be repaired or
replaced.
Thank you for using NeuLog!
Flexible, simple, fast, forward thinking.
W
A: 850 St Paul Street, Suite 15, Rochester, NY 14605
P: 1.866.553.8536
V04302013