Neulog pressure sensor guide – Carolina NeuLog Pressure User Manual
Page 4
NEULOG PRESSURE SENSOR GUIDE
The sensor is pre-calibrated at the factory. The built-in software in the logger can be
upgraded for free at any time using the provided firmware update.
Inside the pressure sensor’s plastic body there is a flexible membrane which bends
with atmospheric pressure differences. On one side of the membrane there is a
vacuum which is compared against the other side of the membrane, the atmosphere.
An electrical charge is generated based on the amount of flexing in the membrane.
Temperature is taken into account using internal circuitry during the pressure
calculation as to normalize the data for any thermal fluctuations.
Maintenance and storage:
Never submerge the NeuLog plastic body in any liquid.
Do not allow liquid into the pressure sensor’s body.
After use, gently wipe away any foreign material from the pressure sensor.
Store in a box at room temperature out of direct sunlight.
Do not blow directly into the sensor (No liquids should enter the sensor).
Warranty:
We promise to deliver our sensor free of defects in materials and workmanship for a
period of 3 years from the date of purchase. Our warranty does not cover damage of
the product caused by improper use, abuse, or incorrect storage. Sensors with a shelf
life such as ion selective proves have a warranty of 1 year. Should you need to act
upon the warranty please contact your distributor. Your sensor will be repaired or
replaced.
Thank you for using NeuLog!
Flexible, simple, fast, forward thinking.
W
A: 850 St Paul Street, Suite 15, Rochester, NY 14605
P: 1.866.553.8536
V04302013