Kaiser EG63... - Manual (Page 12)

12
EN
Adjustment of the minimum setting
following conversion to a different gas type
Conversion from natural gas to LPG
Ovens with stainless steel front:
 Turn the temperature control knob to the
minimum position,
 Then remove the knob. Insert a screwdriver
through the aperture to engage the bypass
screw
1,
 Turn the screw fully to the right.
Ovens with glass fronts:
 Turn the temperature control knob to the
minimum position,
 Remove the front by unscrewing the two
ring nuts,
 Insert a screwdriver through the hole in the
front wall of the oven and turn the screw
1
fully clockwise.
Conversion from LPG to natural gas
 Turn the oven temperature control knob to
the „Minimum“ position and allow the
appliance to warm up for about 10 minutes,
 Then turn the bypass screw anticlockwise
to a obtain a low but stable flame,
 Replace the front.
Attention! After converting the appliance
to a different type of gas, remember to
change the data plate
2 to one with the
new data (gas type and pressure)
1
2