Actiontec V1000H User Manual - Manual (Page 55)

52
Wireless VDSL Modem Router
Remote GUI
The Remote GUI screen allows you to setup the Modem Router so that it can be
accessed from a remote location. To use:
Click 1. Remote GUI from the menu on the left side of any Advanced Setup
screen. The Remote GUI screen appears.
Click in the 2. Enable radio button next to Remote GUI to activate.
Enter a user name and password in the appropriate text boxes beneath step 2. 3.
Set the remote management port. It is set to port 443 by default. If the remote 4.
management port number has been changed, you will need to use the URL
“https://” followed by the Modem Router’s IP address, a colon (:), then the port
number to which the remote management port was changed.
Example: https://192.170.1.1:234.
Select the remote management timeout. If you select one of the time periods 5.
provided in the drop-down list, remote management of the Modem Router will
stop after the selected time period, if no actions are detected.
Click 6. Apply to save your changes.