Actiontec V1000H User Manual - Manual (Page 50)

47
Chapter 5 Advanced Setup
Enter the new modem IP address and modem subnet mask in the appropriate 2.
text boxes.
Click 3. Apply and Reboot. The Modem Router reboots with the new settings.
To change the Modem Router’s DHCP settings:
Click 4. Enable to activate the Modem Router’s DHCP server.
Enter the DHCP server’s beginning IP address, ending IP address, and subnet 5.
mask address in the appropriate text boxes.
Enter the DHCP server’s lease time period by entering the days, hours, and 6.
minutes in the appropriate text boxes.
Set the DNS values by selecting Dynamic or Static (clicking in the appropriate 7.
radio button), then, if needed enter the IP addresses for DNS server 1 and 2.
Click 8. Apply to save your changes.